বুধবার, ৮ ফেব্রুয়ারী, ২০১২

Power factor of the Bangladesh Power Development


                                Power factor of the Bangladesh Power Development
We know, and now the actual available power within the meaning cosigner standards. However, there is no factor × kW. Therefore, the lower will be available for the same kW power supply, the machine,
K.V.A the rating will be more. The machine will need a large size, small wonder that burden. Also increase the power factor of less than line voltage drop. Supply Authority to supply the customer s specific voltage, otherwise the customer demand for the relatively large size of the voltage regulator is required.
Transmission lines cross the wire increases. Low power factor due to the electrical machine and other equipment of the establishment, preservation and management of cost increases. This is more than
Tarps  charged. Therefore, the benefit of a high power factor is -
. Who provided the station(kVAR) is less than its value. Other amounts (kW) power production and distribution system that supplies the electrical machine and other equipment to ensure the maximum use.
. Transmission line power factor is less than a high current flow. Transmission efficiency increases and the line is less than Loss.
. Conductive copper saving is so beautiful compared to s.
. The higher the power factor value, the line will be to improve regulations.
Power Factor is used to upgrade to it that all equipments -
1. High Power Factor  motor.
2.  phase Advancer.
3. Capacitor static.
4. Capacitor booster.
5. Synchronous Condenser.
The most economic power factor: - When a customer to upgrade the power factor, the maximum kVA demand charge savings are. Power factor for the development of additional capital investment for equipment and to install it. Therefore additional customer interest and depreciation on capital invested per year, is to bear.
Therefore, net annual saving = annual saving - annual expenditure for pf correcting equipment.
The most cost effective P, F, refers to - "The value to which the power factor should be improved so as to have maximum net annual saving is known as most economical power factor.''
                                                                        N.B:-Next blog see you leter